I have been informed by some customers that there is some confusion in which files to purchase since I have two of the same cabinet for large printers and small printers.
If your printer cannot print larger than 256mm squared, then purchase the STL for small printers. There is more work as there is assembly required for everything, but will accomplish a nice secure storage base when finished.
https://www.rcshortkitsandprints.com/product/xtool-f2-ultra-uv-laser-organizer-base-for-Smaller-Printers
For printers with a 300MM or larger bed size, like the Bambu Labs H2 Series (D, S, C,), Creality K2 Plus, AnyCubic Kobra 3 Max, Elegoo Neptune 4 Max, Prusa XL and similar.
https://www.rcshortkitsandprints.com/product/xtool-f2-ultra-uv-laser-organizer-base
The 3MF files were generated on Bambu Studio, so using them in other slicers will require modifications. I also include all the STL files so you can import and slice however suits you best.
I try to make these as user friendly as possible by adding modifiers to prevent supports from being used where they are not needed, but cannot accomodate different slicers versions or types, so please go over everything before printing as these use a lot of filament, and I would rather you not waste any. When you slide through the layers after slicing, check that no supports are inside reaching up to the top as they are not required, I built in bracing to prevent the need for extra infill and supports while maintaining overall strength. The only ares needing support ar the openings above the drawers and for the large circles and pegs where the two halves join, nothing else needs supports.